Solid Powder High Pressure Diaphragm Pump

Solid Powder High Pressure Diaphragm Pump

High Pressure Diaphragm Pump Products Description The diaphragm pump is commonly used as an embolic pump. It utilizes a membrane to transport liquids while also keeping the pump cylinder separated to prevent damage. The diaphragm's left side that comes in contact with the liquid is either made...

Product Introduction

 

 High Pressure Diaphragm Pump

 

Products Description

 

The diaphragm pump is commonly used as an embolic pump. It utilizes a membrane to transport liquids while also keeping the pump cylinder separated to prevent damage. The diaphragm's left side that comes in contact with the liquid is either made of or coated with a material resistant to corrosion. Meanwhile, the right side is filled with water or oil for balance.

 

Products Parameters

 

Model In/outlet Max particle diameter (mm) Air inlet size Max flow rate Max head Max Air
(inch) (inch) (l/min) (m) press(bar)
BS25 1" 4 1/2" 169 86 8.6
BS40 1 1/2" 5 3/4" 398 86 8.6
BS50 2" 6 3/4" 745 86 8.6
BS80 3" 9.4 3/4" 1065 86 8.6

 

Products Application

 

Industry: acid, alkali, solvent, suspended solids, decentralized system.

Petrochemical industry: crude oil, heavy oil, grease, mud, mud, etc.

Due to: resin, solvents, stain, paint, etc.

Chemical industry: detergent, shampoo, lotion, cream, hand cream, surfactant.

Ceramics, mud, ceramic slurry, lime, clay slurry.

Mining, coal slurry, magma, mud, mortar, powder slurry, lubricating oil etc.

Water treatment: lime, soft sediment, sewage, chemicals, waste water.

Industry: liquid and solid, chocolate, salt, vinegar, sugar, vegetable oil, soybean oil, honey, animal blood.

Beverage: yeast, syrup, concentrate, the mixture of gas and liquid, wine, fruit juice, corn starch, etc.

Pharmaceutical: solvents, acid, alkali, plant LianYe, ointment, plasma and other kinds of medicine material liquid.

Paper industry: binder, resin, paint, printing ink, paint, hydrogen peroxide, etc.

Electronics: solvents, plating solution, cleaning fluid, sulfuric acid, nitric acid, waste acid, polishing liquid, corrosive acid.

Textile: dye chemicals, resins, rubber, etc.

Construction: cement, ceramic tile adhesive, rock slurry, ceiling, paint, etc.

Industry: polishing emulsion, oil, coolant, automotive primer, oil emulsion, degreaser, paint, lacquer, varnish additive, etc.

Furniture industry: binder, varnish, dispersions, solvents, reagents, white glue, epoxy resin, starch adhesive.

Metallurgy, casting, and the dyeing industry, metal plasma, hydroxide and carbon slurry, dust washing pulp, etc.

 

Products Advantages

 

1, Pneumatic diaphragm pump polypropylene material relative density is small, only 0.89-0.91, is one of the lightest varieties of plastics.

2, polypropylene material is qualitative good mechanics performance, in addition to the resistance to impact and other mechanical properties are better than polyethylene, processing performance is good; Polypropylene pneumatic diaphragm pump texture pure, non-toxic, good electrical insulation.

3, Polypropylene chemical performance is good, almost no water absorption, and the vast majority of chemical reaction, suitable for liquid transportation, such as acidic sulfate also known as acid fluid diaphragm pump.

4 pneumatic diaphragm pump, polypropylene as he powered by air, and it is destined to his unparalleled safety performance and quiet performance.

5, explosion-proof performance: don't worry about danger because of wire, the engine, in the environment of the inflammable, explosive operation need not take any protective measures, and don't have to worry about there will be noise annoyance;

6, pneumatic diaphragm pumps do not need irrigation water diversion, up to seven meters, suction lift up to 84 meters.

7, can be submerged in the working medium, the water pump no rotating parts and no shaft seal, diaphragm, such as the movement of the pump and pumping medium components, workpiece medium completely separated, the conveying medium will not leak out.

8, pneumatic plastic diaphragm pump body to do a variety of material, has good corrosion resistance, suitable for all kinds of medium

9, pneumatic small diaphragm pump on integral structure to optimize, the pump cavity and competent road has improved remarkably, self-priming function and flow head has a lot to improve. Customers to become super flow pneumatic diaphragm pump and filter press special pneumatic diaphragm pump.

10, pneumatic diaphragm pump flow and pressure has greatly enhance not only, also significantly reduce the noise, because KY the pump all adopt the reverse osmosis filtration core, truly fall the action of the sound without resistance;

 

Packing and Shipping 

 

Packaging Details

plywood boxes or carton boxes

Port: Shanghai/Ningbo

1

 

2

 

 

1684998494005

 

Contact Us

 

 Carrie
 Sales Manager
 

 湖北中麒科技有限公司

 Hubei Zoomkey Science and Technology Co.,Ltd.

 
phone.png

Phone: +86-18071010493

envelope.png

Envelope: bololy2@bllpv.com

address.png

Address: Tumiao village, Hengdian Street, Huangpi District, Wuhan City, Hubei Province, China

address.png

Whatsapp: +86-18071010493

fax.png

Wechat: +86-18071010493

 

 

Hot Tags: solid powder high pressure diaphragm pump, China solid powder high pressure diaphragm pump manufacturers, suppliers, factory

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag